Product Reviews

Silkland DP80 DisplayPort Cable Review: A Short 80Gbps Link for High-Refresh Displays

A compact, high-bandwidth DisplayPort cable for gaming setups where PC and monitor ports align closely and both devices support the desired mode.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

This Silkland DP80 DisplayPort Cable review looks at a short, VESA-certified DisplayPort 2.1 cable built for high-bandwidth gaming displays. Its 1.6-foot length and 80Gbps rating make it most compelling when a compatible PC and monitor sit close together.

Silkland DP80 Cable Review Summary

The quick verdict

Silkland DP80 DisplayPort Cable
4.7/5

2,000+ ratings

Read Amazon Reviews

Silkland DP80 DisplayPort Cable

A compact, high-bandwidth DisplayPort cable for gaming setups where PC and monitor ports align closely and both devices support the desired mode.

  • DisplayPort 2.1 cable with a listed 80Gbps data rate, VESA certification, and UHBR20 compatibility.
  • Uncompressed display modes include 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; DSC-enabled modes include up to 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz, 480Hz, or 360Hz.
  • Supports dynamic HDR10+, 3D, HDCP 2.3, VRR, FEC, ALLM, DSC 1.2a, MST, and uncompressed 7.1, 5.1, or 2.0 audio pass-through.
  • Male-to-male DisplayPort connectors, no-latch plug design, 24K gold-plated connector surfaces, 28AWG tinned copper conductors, and triple shielding.

Pros

  • High bandwidth and advanced DisplayPort 2.1 support give it room for demanding compatible monitor modes.
  • The listed uncompressed and DSC-enabled mode combinations make the intended gaming use clear.

Consider before buying

  • The 1.6-foot length is restrictive if the computer and monitor are separated or cable routing needs extra slack.
  • The highest listed resolutions and refresh rates depend on the capabilities of both the graphics card and display; DSC is required for several combinations.
Read the full review summary

The DP80 cable pairs a 1.6-foot run with a claimed bandwidth of up to 80Gbps, UHBR20 compatibility, and a range of high-refresh display modes.

Silkland lists uncompressed support for 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz, with higher combinations such as 4K at 540Hz and 8K at 240Hz available with DSC.

The cable is also described as supporting HDR10+, VRR, FEC, ALLM, MST, and HDCP 2.3.

Its strongest fit is a desk setup where the computer and display are close, and both ends support the specific resolution, refresh rate, and DisplayPort features a buyer wants.

The cable’s construction details—28AWG tinned copper, triple shielding, a nylon exterior, and gold-plated connectors—are useful design considerations, while the no-latch plugs may suit people who prefer a simpler disconnect. The short reach is the main practical constraint.

The buying factors

Silkland DP80 Cable Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

9/10

Bandwidth headroom

The 80Gbps DP80 rating and UHBR20 support target demanding display modes, subject to compatible source and monitor hardware.

9/10

High-refresh gaming fit

Listed modes reach uncompressed 4K at 240Hz and 2K at 540Hz, with DSC enabling additional combinations.

8/10

Compatibility flexibility

Backward compatibility with DP 2.0 and DP 1.4 broadens its potential use, though the chosen mode still depends on both devices.

8/10

Build design

Tinned copper, triple shielding, and a nylon exterior are substantial construction features for a frequently handled cable.

5/10

Setup reach

At 1.6 feet, it suits nearby components but gives little freedom to route around a desk or reposition equipment.

8/10

Gaming and multi-display features

VRR, ALLM, FEC, DSC 1.2a, and MST support speak to gaming and multi-monitor use when the connected equipment supports them.

Key Features and Specifications of Silkland DP80 Cable

  • DisplayPort 2.1 cable with a listed 80Gbps data rate, VESA certification, and UHBR20 compatibility.
  • Uncompressed display modes include 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; DSC-enabled modes include up to 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz, 480Hz, or 360Hz.
  • Supports dynamic HDR10+, 3D, HDCP 2.3, VRR, FEC, ALLM, DSC 1.2a, MST, and uncompressed 7.1, 5.1, or 2.0 audio pass-through.
  • Male-to-male DisplayPort connectors, no-latch plug design, 24K gold-plated connector surfaces, 28AWG tinned copper conductors, and triple shielding.
  • Nylon exterior and 1.6-foot length; intended for indoor use and compatible with devices that have DisplayPort ports.
  • Backward compatible with DisplayPort 2.0 and DisplayPort 1.4. Silkland describes a 24-month service period and technical support within 18 hours.

Pros and Cons of Silkland DP80 Cable

Pros

  • High bandwidth and advanced DisplayPort 2.1 support give it room for demanding compatible monitor modes.
  • The listed uncompressed and DSC-enabled mode combinations make the intended gaming use clear.
  • Construction includes triple shielding, tinned copper conductors, and a nylon exterior.
  • No-latch connectors may be easier to release when changing a tightly placed cable.

Consider before buying

  • The 1.6-foot length is restrictive if the computer and monitor are separated or cable routing needs extra slack.
  • The highest listed resolutions and refresh rates depend on the capabilities of both the graphics card and display; DSC is required for several combinations.
  • The no-latch design may be less reassuring to buyers who prefer a locking plug, so check whether the connector will remain secure in the intended setup.

Who Should Buy Silkland DP80 Cable?

Good fit

Consider the DP80 if your PC and monitor are close together and you want a short DisplayPort connection for a high-refresh gaming display.

The 80Gbps rating and UHBR20 compatibility are most relevant when both devices support DisplayPort 2.1 modes; the cable alone cannot add those capabilities to older hardware.

Before choosing it, verify the exact output and input ports on your graphics card and monitor, then compare their supported resolution, refresh rate, and DSC requirements.

If the connection is direct and the desired mode is supported at both ends, the cable’s short run can help keep a compact desk setup tidy.

Its listed backward compatibility also makes it an option for some DP 2.0 or DP 1.4 equipment.

In that case, buy it for the connection and length you need rather than expecting older devices to use the cable’s full bandwidth rating.

Who should skip it

Skip this length if your computer is under the desk, the display is mounted farther away, or your routing path needs slack. Measure the actual path between ports before buying.

Choose a different cable length if you regularly move the monitor or need room for a standing desk’s travel.

Also confirm the desired display mode with both device specifications if you are buying specifically for a maximum refresh rate or resolution.

What the Silkland DP80 Cable means for a gaming setup

Bandwidth depends on the whole display chain

The 80Gbps rating is a useful signal of the cable’s intended tier, but it does not determine the mode by itself.

The graphics card, monitor, settings, and whether a mode uses DSC all affect what resolution and refresh rate can be selected. Buyers should check both device specifications for their target mode before relying on the highest listed combinations.

A short cable can simplify a close connection

At 1.6 feet, the DP80 is designed for a direct, nearby connection. That can be convenient when a PC sits beside or directly under a monitor, but it leaves limited slack for routing, cable management, or future repositioning.

Measuring the port-to-port path—including the route around a stand or case—helps avoid an awkwardly taut installation.

Construction details suit regular handling

The cable uses 28AWG tinned copper conductors, triple shielding, and a nylon exterior, with gold-plated connector surfaces. These are practical design features for a cable that may be plugged and unplugged or routed around a desk.

The no-latch connector design also makes removal straightforward; buyers who value a locking connection should consider how the plug will sit in their particular ports.

Gaming and multi-monitor functions need compatible devices

VRR, ALLM, FEC, DSC 1.2a, and MST are listed among its supported technologies.

Their usefulness depends on the graphics card, display, and configuration, so it is sensible to confirm the features required for a gaming or multi-monitor setup rather than treating cable support alone as a guarantee of a specific result.

Alternatives to Silkland DP80 Cable

One useful alternative is included because it offers a meaningfully longer reach with a different bandwidth rating.

Computer DisplayPort Cables alternative

Silkland 54Gbps DisplayPort 2.1 Cable, 10 ft
4.6/5

7,000+ ratings

Read Amazon Reviews

Silkland 54Gbps DisplayPort 2.1 Cable, 10 ft

Choose the 10-foot model if you need substantially more reach and its 54Gbps bandwidth and listed modes fit your equipment.

Choose the DP80 when a short cable is enough and the extra bandwidth headroom is useful for your compatible setup.

  • This Silkland model is a 10-foot, 54Gbps DisplayPort 2.1 cable.
  • Its listed modes include 16K at 60Hz with DSC, 8K at 120Hz, and 4K at 240Hz; it also lists backward compatibility through DisplayPort 1.0 and features a braided exterior.
  • The DP80 is a 1.6-foot, 80Gbps cable with UHBR20 compatibility and listed uncompressed 4K at 240Hz support, suited to close connections and compatible high-bandwidth setups.

Is Silkland DP80 Cable Worth It?

The Silkland DP80 DisplayPort Cable is worth considering for a close-range gaming setup that needs a short DisplayPort 2.1 connection and has compatible hardware.

Its 80Gbps rating, UHBR20 support, and extensive mode list make it a feature-rich option on paper, while the reinforced construction details suit routine desk use.

Measure the route and verify the graphics card and monitor support the mode you want before buying.

If 1.6 feet is enough and both devices can use the relevant DisplayPort features, it is a well-targeted choice; if you need more reach, its compact length is the decisive drawback.

Your review at a glance

Silkland DP80 DisplayPort Cable
4.7/5

2,000+ ratings

Read Amazon Reviews

Silkland DP80 DisplayPort Cable

A compact, high-bandwidth DisplayPort cable for gaming setups where PC and monitor ports align closely and both devices support the desired mode.

  • DisplayPort 2.1 cable with a listed 80Gbps data rate, VESA certification, and UHBR20 compatibility.
  • Uncompressed display modes include 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; DSC-enabled modes include up to 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz, 480Hz, or 360Hz.
  • Supports dynamic HDR10+, 3D, HDCP 2.3, VRR, FEC, ALLM, DSC 1.2a, MST, and uncompressed 7.1, 5.1, or 2.0 audio pass-through.
  • Male-to-male DisplayPort connectors, no-latch plug design, 24K gold-plated connector surfaces, 28AWG tinned copper conductors, and triple shielding.

Written by

lercpa.org Editorial Team

Editorial team

lercpa.org publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

Silkland DP80 DisplayPort Cable

Silkland DP80 DisplayPort Cable

A compact, high-bandwidth DisplayPort cable for gaming setups where PC and monitor ports align closely and both devices support the desired mode.

  • DisplayPort 2.1 cable with a listed 80Gbps data rate, VESA certification, and UHBR20 compatibility.
  • Uncompressed display modes include 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; DSC-enabled modes include up to 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz, 480Hz, or 360Hz.
Check Video Reviews on Amazon